Mini Sumo Robot Rev 10
2,576
views
106
downloads
0 comments
Loading comments...
Mini Sumo Robot Rev 10
3D
Published 2021-08-29T18:40:42+00:00
1
0
Add to Collection
Description
This sumo robot is a mini sumo robot. Designed to fit inside a 10 cm area. Not only that it is battery operated with rechargeable 3.7v AAA sized batteries. Here's what you will need to build this.
- All printed parts. You need to print 1 of each and two motor holders.
- 5v regulator.
- Proximity sensors of your choice.
- Pololu QTR reflectance ir sensors.
- 2 Pololu 50:1 micro gear motor and 32mm wheels.
- A small power switch.
- 3mm screws.
- Arduino nano with gpio exansion shield.
- Hot glue and zipties.
Printing Details
The main chassy needs a ton of support material but only support material that is touching the build plate. The rest you do not need.
Technical Information
Date published | 29/08/2021 |
Time to do | 5 - minutes |
Dimensions | 100 by 100 by 80mm |
More Information
Object Parts